Xindak CA 20th Anniversary Edition HiFi-Leistungsverstärker-Vorverstärker, brandneu
The CA preamplifier is a member of the Xindak 20th Anniversary Edition series, designed for use with the 20th Anniversary Edition Power PA. The pre-amplifier adopts a wide-band audio transformer + transistor hybrid amplifier circuit, and a dual-mono circuit design. The power supply and control circuit between the channels are independently powered. Features: 1. Dual mono amplifier circuit design 2. The input stage specially selects two special permalloy broadband audio...
More info
In Stock: 10
XINDAK 20th Anniversary Edition AK4397 Delta-Sigma D/A DAC-Decoder 192 kHz/32 Bit
Xindak's 20th anniversary product DAC is a high-performance audio decoder with a 32 Bit DAC chip, using the AK4397 Delta-Sigma D/A conversion IC from AKM. This IC has a powerful 32 Bit processing capability, which makes the D/A conversion capability more accurate and helps to reproduce higher-quality music signals. Power supply system: The machine adopts 4 Xindak special low-leakage magnetic power supply transformers and up to 24 sets of independent power supply units to reduce the interference...
More info
In Stock: 48
Xindak 20th Anniversary Edition PA Klasse A Zweikanal-Leistungsverstärker Klasse A 100 W@8 Ω
Xindak 20th Anniversary Edition series products include 4 products including turntable, DAC, pre- and post-amplifiers. It is a commemorative version specially launched by Xindak to celebrate its 20th anniversary. Features: The input stage adopts audio transformer, dual mono design, 100W high-power pure Class A output, super power supply design This machine is a high-power class-A amplifier with dual mono design. The front-stage part adopts Xindak special audio transformer input, and the...
More info
In Stock: 63
XA3200MKIIs is a tube preamplifier, an upgraded version of XA3200MKII. Each channel uses a 12AX7 and a 12AT7 respectively. The appropriate amount of negative feedback between stages is used to improve the frequency bandwidth and reduce various distortions. A CRC filter network is also used to effectively eliminate AC ripples in the power supply and improve the signal-to-noise of the entire machine. Compare; In order to make the sound more perfect, two Xindak special permalloy audio transformers...
More info
In Stock: 10
Xindak A06 Hi-Fi-Vollverstärker, USB-DAC-Fernbedienung
Features: 1.5 RCA inputs. 2.Built-in high performance USB DAC (PCM2704). 3.Remote Control. A06 is a stereo integrated amplifier with full remote control system. It is a quality entry level Hi-Fi product, specially designed for the music enthusiasts and audiophile beginners. The A06 adopts toroidal transformer to supply power and the relay take charges of the input switch. In order to increase the reliability and avoid the bad contact of the relay incurred by improper use, it cancelled the relay...
More info
In Stock: 5
Xindak A08 Class D Integrierter Verstärker XLR Balance
Features: A08 is a dual/mono channel integrated Amplifier. It adopted the 300W linearity power and ICEpower250A amplifying module as the power amplification. ICEpower is a breakthrough of the technology which digital amplification is based on PAM (Pulse Amplitude Modulation) and overcome the shortages of D class amplifiers' sawtooth wave distortion to realize the digital conversion with higher precision and lower distortion. At the same time, to express the advantages of small size, lower heat,...
More info
In Stock: 5
Xindak A600P HiFi-Leistungsverstärker der Klasse A, Dual-Mono-Design, 80 W (8 Ω), brandneu
More info
In Stock: 10
Xindak CA-1 Vorverstärker High-Fidelity-Dual-Mono-Designschaltung
Features: CA-1 is high fidelity preamplifier with separate double mono channel design inside. Both of the amplifying circuit and power circuit are designed as the left and right channel completely separate with each other, to avoid the interference between left and right channel, and make the sound clearer, with more transparency and detail. CA-1 has reasonable design and excellent layout on the circuit inside. In order to improve timbre, it also adopts Xindak patent technology "Bias Technology...
More info
In Stock: 5
Xindak CS88/CS34 KT88*4 Röhren-Vollverstärker
Features: CS88 is a new integrated tube amplifier with KT88 developed by Xindak recently. Its output power can be 60W for each channel. It can drive loudspeaker easily because of its high output power. Specifications: S/N Ratio: ≥89dB THD: ≤0.25% (1kHz/2V) Output Impedance: 4Ω, 8Ω Number of Channels: 2 Frequency Response: 10Hz~30KHz Input: 1 group RCA Rated Output Power: 60W(CS88)/ 32W(CS34) Net Weight: 27.5Kg Weight: 30Kg Dimensions (W*H*D): 344mm*242mm*483mm
More info
In Stock: 5
Xindak D2 Hifi D/A Konverter 192KHz/24bit Digital Audio Decoder
Features: D2 is a HI-FI D/A Converter of Xindak which included two version: vacuum tube output and transistor output with digital coaxial, optic, USB input. It adopts Wolfson AudioPlus Pure Sound ultimate WM8714 as decode chip. Realize the full-module match in interior, and match with different method according to listening hobby personally. Output circuit of transistor version adopts low-noise and non-inductive resistance and BB company’s OPA2604 operational amplifier. Also it can plug...
More info
In Stock: 5
Xindak DAC-5 24Bit/192K Digital-Analog-Wandler DAC XLR
Features: DAC-5 is a new D/A converter of Xindak with excellent upgrading performance. In order to improve the sound quality, Xindak engineers have also used patent technology on avoiding dynamic invalidation of capacitors, which could decrease the distortion on the High especially. It can upgrade the digital signal recorded in PCM format of common CD player to 24Bit/192Khz to achieve higher processing precision and highly improve the dynamics and treble extension, making the sound more mellow...
More info
In Stock: 5
Xindak H1 Kopfhörerverstärker, Leistungsverstärkerschaltung der Klasse A
Features: H1 headphone amplifier is specially designed for Hi-Fi & PC system. If you use USB cable connect the unit to your PC USB connector, it's could make your PC become part of Hi-Fi system, and through it you could enjoy kinds of high-quality music in your PC. 1.Class A power amplifier circuit, high SNR and low distortion. 2.Built-in high performance USB DAC (PCM2704). 3.Standard-B type of USB connector. 4.Two 6.35mm headphone jacks. Specifications: Input Impedance: 47K Output: RCA*1,...
More info
In Stock: 5
Xindak MS-3 Monoblock-Röhrenleistungsverstärker KT88 Gegentaktschaltung a Pair
the price is for one pair Features: MS-3 adopts KT88(6550) tubes which are especially for audio amplify as amplify tubes. The preliminary amplifier stage adopts a 12AX7(ECC83) tube. In addition, a 12AT7 tube composes of a long-tail phase-reversal push-pull circuit. The following stage adopts two KT88/6550 tubes for power amplifying, which are especially for audio amplifiers. The output transformer is high quality EI type with wider frequency response. The power supply part adopts 280W high...
More info
In Stock: 5
Xindak MT-1 Hifi 12AX7 Integrierter Röhrenverstärker
Features: MT-1 08 Hifi integrated tube amplifier, adopts audio grade Shuguang brand tube EL84 for voltage amplifying, and the preamplifier stage adopts Shuguang tube 12AX7 and 12AU7 for long-tailed phase inversion and driving. ALPS volume potentiometer is adopted for volume control, and high quality relay is adopted for switching the input single. The output transformer is EI mode with wide frequency response. The main transformer is 165W high reliable annular transformer with excellent quality...
More info
In Stock: 5
Xindak MT-2 Mini-Vakuumröhrenverstärker/Kopfhörerverstärker
Features: MT-2 is an integrated amplifier adopts tube amplifying and also can use as headphone amplifier. The units appearance is very exquisite and small, which width is only 26cm. The circuit adopts 6P1 vacuum tube as its amplifying tube which form pre-amplifying and drive with 6J1 tube. Adopts Xindak E type special made broadband output transformer, about power supply, it’s adopts 85w high reliability E type power transformer. Besides providing 6.35mm headphone output Jack,it also have USB...
More info
In Stock: 5
Xindak MT-3(II) EL34 Röhren-Stereo-Leistungsverstärker 2011
Features: LP-1 is a preamplifier for phono special. The power supply and signal processing are designed complete separate with each other. It adopts classic Matisse standard circuit, and support MM. There are 4 tubes inside in total. It adopts two-stage common-cathode amplifier and cathode follower, sets RIAA circuit connected in series. In addition, it especial adopts Xindak patent technology 'Bias Technology for Avoiding the Dynamic Invalidation of Capacitor'. The sound performance is...
More info
In Stock: 5
Xindak PA-1(II) Stereo-Leistungsverstärker, Ringkerntransformator, Schaltungsdesign
Features: The new PA-1 Stereo power amplifier is upgraded on the PA-1 mono block amplifier, the peak output power can reach 200W per channel. It adopts the independent dual mono circuit design, using two high-power toroidal transformer and rectifier filter circuit to separately supply power for each channel, the voltage amplifier circuit also using the special Xindak manufactured large capacity inductance module to do the auxiliary power filtering, which can significantly improve the purity of...
More info
In Stock: 5
Xindak PA-M(III) Hi-Fi-Mehrkanal-Leistungsverstärker parallel
Features: PA-M (III) is exclusively used in amplifying for mid audio and surround audio. It can constitute high-qualified 5.1 channel HT system with your stereo HI-FI system and Subwoofer. 1. 3 channel 2. final-stage: SanKen 2SC4468/2SA1695 high power valve to parallel output 3. Can switch to balanced signal or nonequilibrium signal 4. Using Dual toroidal transformer,high-capacity electrolytic capacitor for power supply 5. Nature 、loose 、powerful and thick sound. It adopts Dual toroidal...
More info
In Stock: 5
Xindak PA-M(III) Hi-Fi-Mehrkanal-Leistungsverstärkerschaltung
Features: PA-M (III) is exclusively used in amplifying for mid audio and surround audio. It can constitute high-qualified 5.1 channel HT system with your stereo HI-FI system and Subwoofer. 1.3 channel. 2.final-stage: SanKen 2SC4468/2SA1695 high power valve to parallel output. 3.Can switch to balanced signal or nonequilibrium signal. 4.Using Dual toroidal transformer,high-capacity electrolytic capacitor for power supply. 5.Nature 、loose 、powerful and thick sound. It adopts Dual toroidal...
More info
In Stock: 5
Xindak V30 KT88*4 Röhren-Vollverstärker Fernbedienung
Features: 1.Adopt 12AX7(ECC83)*2, 6N8P(6SN7)*2 and KT88(6550)*4 Tubes to compose standard integrated amplifier; 2.Separate power supply to pre-amplifier stage and power amplifier stage; 3.Remote control available for all functions. Specifications: S/N Ratio: ≥89dB THD: ≤0.2% Number of Channels: 2 Tubes: 12AX7(ECC83)*2, 6N8P(6SN7)*2, KT88(6550)*4 Input Sensitivity: 390mV Frequency Response: 10Hz~70KHz (-1dB) Rated Output Power: 50W(8Ω) Remote Control: Supported Net Weight: 24Kg Weight: 27Kg...
More info
In Stock: 5